![](http://www.neidlein.de/images/punkt.gif) |
Mechanical clamping system with compensating drive pins |
![](http://www.neidlein.de/images/punkt.gif) |
With guaranteed datum point at face of workpiece, thus maintaining linear measures |
![](http://www.neidlein.de/images/punkt.gif) |
Minimal centre runout due to extended guide length on centre |
![](http://www.neidlein.de/images/punkt.gif) |
Clamping force is transmitted by the tailstock |
![](http://www.neidlein.de/images/punkt.gif) |
The centre point is mechanically locked when in the clamped position |
![](http://www.neidlein.de/images/punkt.gif) |
Accurate within 0.01 to 0.02 mm TIR |
![](http://www.neidlein.de/images/punkt.gif) |
High driving torque |
![](http://www.neidlein.de/images/punkt.gif) |
Extended service life of the centre and drive pins due to its rigid construction |
![](http://www.neidlein.de/images/punkt.gif) |
Driving diameters from 6 to 170 mm |
![](http://www.neidlein.de/images/punkt.gif) |
Work pieces up to 350 mm in diameter and 2000 kgs in weight |
![](http://www.neidlein.de/images/punkt.gif) |
User friendly |